Teclock stands series which can make precision measurement of work piece by mounting Dial Indicator or Digital Indicator. Presented by MSP Metrology (M) Sdn Bhd from Teclock Japan
 

---

Features

 

Stand for Dial Indicator/Digital Indicator

Theses are stands which can make precision measurement of work piece by mounting Dial Indicator or Digital Indicator. As to natural granite (micro-granite) base, its organization is fine particle and work piece slides smoothly without ringing. Stable and high flatness accuracy within 0.001mm / 200mm square is also characteristics. Please select referring to size of base or fine adjustment device from various lineup.

Granite Comparator Stand

• Natural micro-granite is used for all granite comparator stands.
• Flatness accuracy : within 0.001mm / 200mm square.
• Sliding smoothly and objects to be measured are not damaged. It is superior for anti-abrasion.
• The rigid granite base is free from burrs and pileups.
• It is easy for maintenance as base never suffers from rust

---

Specifications

Model	Type	Specimen Table Size (AxB) (mm)	Height of Pole (C) (mm	Movable Range (D)	Weight (kg)
USG-10	Standard	100 x 150	175	0 ~ 130	3.5
USG-14	Standard	150 x 150	175	0 ~ 130	4.9
USG-18	Standard	150 x 200	240	0 ~ 200	5.8
USG-20	Fine Adjustment	100 x 150	175	0 ~ 115	3.5
USG-24	Fine Adjustment	150 x 150	175	0 ~ 115	4.9
USG-28	Fine Adjustment	150 x 200	240	0 ~ 180	5.8
USG-29	Precision Fine Adjustment	150 x 200	240	0 ~ 200	6.0

Model	Type	Specimen Table Size (AxBxC) (mm)	Movable Range (D) (mm)	Bush ∅(E) (mm)	Weight (kg)
USG-30	Square Screw, Arm Slide	150 x 200 x 50	53 ~ 250	∅8	7.3
USG-31	Square Screw, Arm Slide	200 x 250 x 50	53 ~ 250	∅8	10.5
USG-32	Square Screw, Arm Slide	250 x 250 x 50	53 ~ 250	∅8	12.5

For USG30~32, depending on the measuring device in use, the probe may not contact to the base surface since the effective movable range is 53mm or more. Use an extension rod or the like to extend. Other combinations of specimen table and pole unit than the above chart are also possible. The specimen table is possible to be made up to 500x500mm according to the requested size.