TNM-AX6 Series

Automatic Multi-mode Embedding Hot Mounting Press Machine

Taiwan Nakazawa Company independently designed and developed the TNM metallographic hot embedding machine suitable for the metal manufacturing industry, combined with the elite talents of major industries, to create a high-performance ultra-high cost-effective metallographic embedding equipment that is both beautiful and practical. Using exclusive temperature control technology and intelligent pressure control system, the metal embedding process is upgraded to the best state, not only the sample preparation is fast and safe, the operation is simple and easy to use, but also it can ensure that there is no gap between the metal sample and the edge of the embedding material. For the factors that may affect the metallographic experiment

 

Efficiency Prerequisite

TN Precision Multi-mode Embedded Automatic Hot Mounting Press Machine is a powerful hot mounting machine that can compeleted 6 molding samples at the same time. For one process, it takes about only 15 minutes for 6 samples to produce.

 

---

 

Multi-mode Concept

After you completed the molding process, the multi-mode embedded technology allow you to directly proceed with rough grinding operation to fasten your sample preparation operation process.

 

---

 

Useful and Ergonomical Design

The machine is design to make your job easier. Every part of the design was made very thoughtful to increase productivity and efficiency.

 

---

Specifications

 

Item		TNM-AX6
Mounting Parameters	Size	Ø32mm
	Greatest Pressure	Inside the mold tube：1625psi(114kgf/cm^2)；actuation pressure：130kgf/cm^2
	Pressure Control System	Uncontrollable, hydraulic system
	Filling Mechanism	Rotary push down
	Quantity	1-6(single MAX high：30mm
	Temperature	110ºC – 200ºC
Panel Function	Production Mode	Full automatic pressure compensation
	Function Setting	1. Forming time 2. Cooling time 3. Forming temperature
	Extra Features	1. Automatic shutdown 2. Buzzer mode selection A. On B. Off C. Buzzer for 30 seconds
Security Mechanism	Safe Temperature Protection	The system cannot operate until the safe temperature is reached
	Emergency Safety Switch	After the emergency switch is pressed, all functions stop
	Overload Protection	The machine has a complete overload protection mechanism
Supply	Electricity	Three phase 220V/ 380V 60/50Hz
	Heating Power	3000W
	Total Machine Power	3500W
	Size	W540 x D552 x H1300mm
	Weight	120kg
	Cooling Water	Inlet pipe size 3/8″ inch (3 pipes)
		Outlet size 5/8″ inch (5 pipes)
Standard Equipment		Dispensing scoop x 1; funnel x 1; water inlet pipe 2M x 1; drain pipe 2M x 1; release agent x 1; #240 abrasive paper 4 sheets; grinding belt table x 1; Hot gloves x 2; upper mold scraper x 1