Phillips Precision Lean Fixture Plates and Clamps for CMM (Inspection Arsenal Series)

Share:


Phillips Precision Lean Fixture Plates and Clamps for CMM (Inspection Arsenal Series)

Accelerate inspection with Inspection Arsenal® easy-to-use LEAN fixture plates and clamps for CMM which combining standard products with expert custom fixture design services by MSP Metrology (M) Sdn Bhd from Phillips Precision USA.
 

Features

Inspection Arsenal for CMM, 3D gage arm, optical comparator, and vision inspection.

Quality inspection no longer needs to be complex, costly and time consuming. Inspection Arsenal® Loc-N-Load™ quickswap, modular fixture plates and work holding help you deliver perfect parts to customers faster, easier and more affordable than ever.

Phillips Precision is your one source for quickswap, modular inspection fixture products, fast and creative custom fixture designs, and quick shipping of orders. Inspection Arsenal® is the only universal fixturing system providing a complete arsenal of inspection tools for most inspection machines.

The lean design resolves the issues that affect profits. It reduces wait time, defective parts and overproduction. Inspectors will work more efficiently, with less excess motion. In fact, we guarantee that you will process more parts per shift— even with less skilled labor. Inspection Arsenal® speeds and simplifies inspection using modular, magnetically interlocking quick-swap fixture solutions.

 


 

Loc-N-Load™ CMM Bundle

Loc-N-Load™ aluminum fixture plates interlock magnetically to remain firmly secured, yet release quickly and easily for the next job. The system installs effortlessly on all CMMs. Select the docking rail and plate combination that best fits your machine. Choose from 3 standard sizes. Kits all contain selections of the Inspection Arsenal® trigger action, lowprofile clamps, stops, and hold-downs to enable quick and easy set-ups.

CMM Fixture System (360mm Dock with Starter Clamp Kit)

Bundle includes:

  • (1) 50 x 360mm Docking Rail
  • (2) 180 x 180mm Plates
  • (1) 180 x 180mm Angle Plate
  • (1) Qualifying Bar Plate*
  • Plus (1) TR-KIT-03M, Starter Work Holding Kit

* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.

This smaller fixture system is perfect for smaller CMM inspection applications.

CMM Fixture System (360mm Dock with Complete Clamp Kit)

Bundle includes:

  • (1) 50 x 360mm Docking Rail
  • (2) 180 x 180mm Plates
  • (1) 180 x 180mm Angle Plate
  • (1) Qualifying Bar Plate*
  • Plus – (1) TR-KIT-02M, Complete Work Holding Kit.

* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.

This fixture system is perfect for smaller CMM inspection applications.

CMM Fixture System (360mm Dock with WORKS Clamp Kit)

Bundle includes:

  • (1) 50 x 360mm Docking Rail
  • (2) 180 x 180mm Plates
  • (1) 180 x 180mm Angle Plate
  • (1) Qualifying Bar Plate*
  • Plus – (1) TR-KIT-01 Inspection Arsenal® “WORKS” Work Holding Kit

* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.

CMM Fixture System (540mm Dock with Starter Clamp Kit)

Bundle includes:

  • (1) 50 x 540mm Docking Rail
  • (1) 180 x 180mm Plate
  • (1) 180 x 360mm Plate
  • (1) 180 x 180mm Angle Plate
  • (1) Qualifying Bar Plate*
  • (1) TR-KIT-03M  Starter Work Holding Kit

* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.

CMM Fixture System (540mm Dock with Complete Clamp Kit)

Bundle includes:

  • (1) 50 x 540mm Docking Rail
  • (1) 180 x 180mm Plate
  • (1) 180 x 360mm Plate
  • (1) 180 x 180mm Angle Plate
  • (1) Qualifying Bar Plate*
  • Plus – (1) TR-KIT-02M, Complete Work Holding kit

* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.

CMM Fixture System (540mm Dock with WORKS Clamp Kit)

Bundle includes:

  • (1) 50 x 540mm Docking Rail
  • (1) 180 x 180mm Plate
  • (1) 180 x 360mm Plate
  • (1) 180 x 180mm Angle Plate
  • (1) Qualifying Bar Plate*
  • Plus – (1) TR-KIT-01  Inspection Arsenal® “WORKS” Work Holding Kit

* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.

CMM Fixture System (720mm Dock with Starter Clamp Kit)

Bundle includes:

  • (1) 50 x 720mm Docking Rail
  • (1) 180 x 180mm Plate
  • (1) 180 x 360mm Plate
  • (1) 360 x 360mm Plate
  • (1) 180 x 180mm Angle Plate
  • (1) Qualifying Bar Plate*
  • TR-KIT-03M Starter Work Holding Kit

* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.

CMM Fixture System (720mm Dock with Complete Clamp Kit)

Bundle includes:

  • (1) 50 x 720mm Docking Rail
  • (1) 180 x 180mm Plate
  • (1) 180 x 360mm Plate
  • (1) 360 x 360mm Plate
  • (1) 180 x 180mm Angle Plate
  • (1) Qualifying Bar Plate*
  • Plus – (1) TR-KIT-02M, Complete Work Holding Kit 

* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.

CMM Fixture System (720mm Dock with WORKS Clamp Kit)

Bundle includes:

  • (1) 50 x 720mm Docking Rail
  • (1) 180 x 180mm Plate
  • (1) 180 x 360mm Plate
  • (1) 360 x 360mm Plate
  • (1) 180 x 180mm Angle Plate
  • (1) Qualifying Bar Plate*
  • Plus – (1) TR-KIT-01 Inspection Arsenal® “WORKS” Work Holding Kit

* Ships with M8 threaded insert. Please note whether you require M6, M10, or M12 sized insert so we can adjust your order.

 


 

CMM Work Holding Kits

Standardize your inspections across the board with Inspection Arsenal® METRIC packaged work holding kits. Select from 62 to 158 pieces to create universal, quick-swap inspection fixturing!

Use for specific setups. To customize a kit, purchase individual components to add more sets. Packaged kits include:

  • Cross-Bow™, Trigger-Block™, D-Block™, Trigger-Finger™ clamps and hold-downs
  • Hole Adjusters
  • Riser-Grip™, Silver-Bullet™, and V-Blocks to lift your parts
  • Simple-Stop™ rails and stops
  • Sturdy Lever Clamps

The “Works” Kit also includes Stand-Off & Rest Pad and Magnetic Riser Sets.

CMM Work Holding STARTER Kit – Metric (62 pcs) (TR-KIT-03M)

A sampling of components perfect for all traditional CMMs. Fast trigger-action, non-marring, low-profile, no tools or messy tape and glue. Now includes our new Sturdy Lever Clamps.

Starter Kit includes:

  • (2) Cross-Bow™
  • (2) D-Blocks™
  • (2) Trigger-Finger™
  • (2) Lever Clamps  2.5″ (shafts included)
  • (2) V-Block 1 set
  • (8) Silver-Bullet™, 4 each – 1″ and 3″
  • (2) Steel shaft / stand-off; stackable
  • (2) Hole Adjusters
  • (4) Simple-Stops™ – 2 each #01, #07
  • (13) Stand-offs, assorted sizes
  • (21) Hex Keys, plus assorted screws
CMM Work Holding COMPLETE Kit – METRIC (82 pcs) (TR-KIT-02M)

Full kit includes everything you need to inspect most any part. Fast trigger-action, non-marring, low-profile, no tools or messy tape and glue. Now includes our Sturdy Lever Clamps – 2 SETS of 3 Sizes: 1.50″, 2.50″, 3.50″ – LC-Set-6.

Complete Kit includes:

  • (4 ea.) Cross-Bow™
  • (4 ea.) D-Block clamps
  • (2 ea.) Trigger-Block™ clamps
  • (2) Trigger-Finger™ hold-downs with (4) 3” steel shafts
  • (4 ea. ) 1, 2, and 3” Silver-Bullet™ stand-offs
  • (7) Simple-Stop™ rails and stops
  • (2) Spring-Loc™ clamps
  • (2) Sliding Stop™ stops
  • (2) Hole Adjusters
  • (2 ea.) V-Block
  • (2 ea.) sturdy lever clamps 1.5″, 2.5″ and 3.5″ (shafts included)
  • Hex key, thumb and button-head screws
CMM Work Holding WORKS Kit – Metric (158 pcs) (TR-KIT-01M)

A combination of components found in Inspection Arsenal® clamp sets, including hold-downs, spring clamps, stops, rails, stand-offs, magnetic components, and more. This kit contains everything you need to create several fixtures across multiple CMMs. Now includes our Sturdy Lever Clamps – 2 SETS of 3 Sizes: 1.50″, 2.50″, 3.50″ – LC-Set-6.

WORKS Kit includes:

  • (4 ea.) Cross-Bow™ and D-Block clamps
  • (2) Trigger-Block™ clamps
  • (2) Trigger-Finger™ hold-downs with (4) 3” steel shafts
  • (4 ea.) 1, 2, and 3” Silver-Bullet™ stand-offs
  • (7)  Simple-Stop™ rails and stops
  • (2) Spring-Loc™ clamps
  • (2) Sliding Stop™ stops
  • (2) Hole Adjusters
  • (2) V-Blocks
  • (34) Stand-off & Rest Pad set
  • (18) Magnetic Riser Set
  • (2 ea.) sturdy lever clamps 1.5″, 2.5″ and 3.5″ (shafts included)
  • Hex key, thumb and button-head screws.

These Loc-N-Load combinations of fixture rails, plates and our largest kit of all work holding clamps create affordable fixtures that reduce setup time and help to process more parts per shift.

 


 

Portable CMM (Gage Arm) Bundle

Further enhance the value of your portable 3D CMMs with the LEAN, quick-swap Loc-N-Load™ fixture system in metric. Install the gage onto the Loc-N-Load™ base and start inspecting. Interlocking fixture plates quickly secure and release with the use of magnets creating highly repeatable setups.

Pre-configured for all portable gage arms and laser trackers. 13mm thick clear anodized aluminum, 20 x 20mm hole pattern, M6 thread.

  • Create multiple fast-swap setups for your gage arm!
  • Ready-made interlocking plates make low-cost fixtures.
  • Inspect more parts per shift, even with less-skilled inspectors.
  • Easily access your granite.
  • Use as dedicated tooling—add to job box.

Get started with a pre-configured bundle and add plates as work requires. Shop floor inspection fixturing need not be expensive – employ Loc-N-Load™ quick-swap fixturing.

Bundle includes:

  • (1) 540 x 300mm Docking Plate
  • (1) 180 x 180mm Loc-N-Load™ Plate
  • (1) 180 x 360mm Loc-N-Load™ Plate
  • (1) 360 x 360mm Loc-N-Load™ Plate
  • (1) Angle Plate
  • Plus – (1) TR-KIT-02M, Complete Kit, 82-pc clamp kit. M6 threads.

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

 


 

Optical Comparator Bundles & Accessories

The slimmest rail, the 180mm Docking Rail is made to fit optical comparators. To speed inspection of parts, alternate your set-ups between the (2) 180 x 360mm LNL fixture plates. All Loc-N-Load™ fixture plates, rails, and clamps are designed to be built like puzzle pieces in a magnetically interlocking style. The ‘STARTER’ clamp Kit is versatile enough to hold most any part. Add one kit per optical comparator to create redundancy in your inspection department. They can be purchased as needed and shipped same day!

Bundle includes:

  • 1 each: Loc-N-Load™ 180mm Docking Rail
  • (2) 180 x 360mm Loc-N-Load™ Plates
  • TR-KIT-03M Starter work holding kit containing non-marring hold downs, v-blocks, stops, and stand-offs.

Starter Kit includes the following pieces:

  • (2) Cross-Bow™
  • (2) D-Blocks™
  • (2) Trigger-Finger™
  • (2) Lever Clamps  2.5″ (shafts included)
  • (2) V-Block 1 set
  • (8) Silver-Bullet™, 4 each – 25mm and 75mm”
  • (2) Steel shaft / stand-off; stackable
  • (2) Hole Adjusters
  • (4) Simple-Stops™ – 2 each #01, #07
  • (13) Stand-offs, assorted sizes
  • (21) Hex Keys, plus assorted screws

M6 threads. Also available are 180 x 180mm fixture plates.

Loc-N-Load™ fixture rails, plates and work holding clamps create affordable, repeatable, and durable fixtures that reduce setup time and process more parts per shift. Plates can be dedicated and kept with the job box for fast, repeatable setups.

 


 

Open-Sight™ – Vision Bundles

Pre-configured bundled systems include everything you need to fixture up fast! A docking rail, fixture plates and your choice of work holding kit.

  • Simply select a docking rail length that will fit the glass on your machine. You can easily piggyback rails for larger machines.
  • Next, select the plate size that best fits your needs.
  • Finally, select a work holding kit: The Standard Kit or The Enhanced Kit

Work holding kits all contain selections of Inspection Arsenal® trigger-action, low-profile clamps, rails, stops, and hold-downs for the most versatility and fastest set-ups.

 


 

Vision Fixture System 100 (100mm Dock with Open-Sight Clamp Kit)

Open-Sight™ Vision fixture system includes the 100mm docking rail, a 100 x 100mm fixture plate and a 34 piece work holding kit.

Choose from two 34 piece work holding kits:

  • Open-Sight™ Vision work holding kit – VIS-KIT-01M includes 2 ea. low profile Spring-Loc™, Sliding Stop™, Trigger-Finger™ and Trigger-Point™ with shafts, hole adjusters; Simple-Stop™ (#01-OS, #06, #07) and 1 clear adjustable platform. Thumb and button head screws, hex key included. Arrives in 5S foam storage.
  • Open-Sight™ Vision work holding kit – VIS-KIT-02M includes Riser-Grip™, 2 ea. Trigger-Finger™, Trigger-Point™ with shafts, V-Block 90° angle and clear corner stop; 4 ea. stand-off (12.7 x 25, 12.7 x 50, 12.7 x 100). Miscellaneous screws.

 


 

Vision Fixture System 200 (200mm Dock with Open-Sight™ Kit)

Open-Sight™ Vision fixture system includes the 200mm docking rail, a 200 x 200mm fixture plate and a 34 piece work holding kit.

Choose from two 34 piece work holding kits:

  • Open-Sight™ Vision work holding kit – VIS-KIT-01M includes 2 ea. low profile Spring-Loc™, Sliding Stop™, Trigger-Finger™ and Trigger-Point™ with shafts, hole adjusters; Simple-Stop™ (#01-OS, #06, #07) and 1 clear adjustable platform. Thumb and button head screws, hex key included. Arrives in 5S foam storage.
  • Open-Sight™ Vision work holding kit – VIS-KIT-02M includes Riser-Grip™, 2 ea. Trigger-Finger™, Trigger-Point™ with shafts, V-Block 90° angle and clear corner stop; 4 ea. stand-off (12.7 x 25, 12.7 x 50, 12.7 x 100). Miscellaneous screws.

 


 

Vision Fixture System 360 (360mm Dock with Open-Sight™ Kit)

Open-Sight™ Vision fixture system includes the 360mm docking rail, two 180 x 240mm fixture plates and a 34 piece work holding kit.

Choose from two 34 piece work holding kits:

  • Open-Sight™ Vision work holding kit – VIS-KIT-01M includes 2 ea. low profile Spring-Loc™, Sliding Stop™, Trigger-Finger™ and Trigger-Point™ with shafts, hole adjusters; Simple-Stop™ (#01-OS, #06, #07) and 1 clear adjustable platform. Thumb and button head screws, hex key included. Arrives in 5S foam storage.
  • Open-Sight™ Vision work holding kit – VIS-KIT-02M includes Riser-Grip™, 2 ea. Trigger-Finger™, Trigger-Point™ with shafts, V-Block 90° angle and clear corner stop; 4 ea. stand-off (12.7 x 25, 12.7 x 50, 12.7 x 100). Miscellaneous screws.

 


 

Vision Bundle also Available in Various Size and Shape in inch:

 


 

Vision Work Holding Kit Options

Open-Sight™ Vision Work Holding Kit – Metric
Description Qty
Hole Adjuster 2
Adjustable Platform 1
Sliding Stop™ (M6) 2
Spring-Loc™  (M6) 2
Simple-Stop™ #01-OS, #06, #07 3
Trigger-Finger™ 2
Trigger-Point™ 2
Steel shaft/stand-off 4
Hex Key, assorted screws 16
Total 34
Open-Sight™ Vision Workholding Kit with Riser-Grip™
Description Qty
Trigger-Finger™ 2
Trigger-Point™ 2
Steel shaft/stand-off 4
Stand-off 12.7 x 25 4
Stand-off 12.7 x 50 4
Stand-off 12.7 x 100 4
V-Block 90° angle 2
Riser-Grip™ adjustable 1
Clear Corner Stop, polycarbonate 2
Miscellaneous screws 9
Total 34

 


 

Specialty Clamps and Vise

Collet Chuck

ER Collet Chucks are a great way to hold small diameter parts. Has a threaded through hole to add a depth stop and a brass tipped set screw on the side to lock it in place. Made from 303 stainless steel for durability and corrosion resistance. Use one or add multiple collet chucks for a multi-part setup. Use on quick-swap Loc-N-Load™ plates or on existing 1” or ½” hole patterns and for ¼-20 or M6 threaded holes. COLLET NOT INCLUDED.

ER-11 Collet Chuck – Metric (CC-ER11-M)

The ER-11 holds parts from .012” to .312” (.3mm to 8mm) diameter. Use on quick-swap Loc-N-Load™ plates or on existing 1” or ½” hole patterns and for ¼-20 or M6 threaded holes.

Accepts all standard ER11 collet sizes. COLLETS NOT INCLUDED.

ER-16 Collet Chuck – Metric (CC-ER16-M)

The ER-16 collet with a flange adds stability for larger round parts from .012” to .416” (.3mm to 10.3mm) diameter. Use on quick-swap Loc-N-Load™ plates or on existing 1” or ½” hole patterns and for ¼-20 or M6 threaded holes.

Accepts all standard ER16 collet sizes. COLLETS NOT INCLUDED

ER-32 Collet Chuck – Metric (CC-ER32-M)

The ER-32 collet with a flange adds stability for larger round parts from .039” to .875” (10mm to 22.2mm) diameter. Use on quick-swap Loc-N-Load™ plates or on existing 1” or ½” hole patterns and for ¼-20.

Accepts all standard ER-32 collet sizes. COLLETS NOT INCLUDED

 


 

Spanner Vise

A two-piece vise especially designed for use on Loc-N-Load™ or other inspection fixture plates. Infinitely adjust the distance to accommodate the work piece and lock down securely.

Soft jaws are standard with a milled step or can be machined to nest the work piece. Gain height with Inspection Arsenal® stand-offs. Black anodized aluminum. For metric plates, the necessary Adapter Plates and Mounting Hardware are included.

Or, choose the enhanced Spanner-Vise™ assembly which includes a dedicated base plate, step jaws, centers and mounting hardware.

Spanner-Vise™ (SP-VISE-2.50-M)

A two-piece vise especially designed for use on Loc-N-Load™ or other inspection fixture plates. Infinitely adjust the distance to accommodate the work piece and lock down securely.

Soft jaws are standard with a milled step or can be machined to nest the work piece. Gain height with Inspection Arsenal® stand-offs. Black anodized aluminum.

For metric plates, the necessary Adapter Plates and Mounting Hardware are included.

Spanner-Vise™ Versatile Assembly (SYS-SP-VISE-2.50-M)

The very popular Spanner-Vise™ for inspection and laser marking setups could very well be your new favorite fixture tool. We’ve added a slider base plate and centers in answer to customer requests. The assembly now includes the Spanner-Vise™, a set of step jaws, centers for cylindrical parts and a slider base specific to this two-piece vise.

The Spanner-Vise™ by itself can be installed on all inch or metric Loc-N-Load™ or other fixture plates. Infinitely adjust the distance to accommodate the work piece and lock down securely. The slider base was created for large spacing requirements while maintaining an even higher level alignment accuracy. Swap between stepped jaws or the centers to move from square to cylindrical parts. The knurled adjusting screw provides the finer adjustments and helps to avoid over tightening. Add stand-offs for height or inquire about custom jaws.

 


 

Real Life Application

 


 

Related Video


Inspection Arsenal CMM Jig


 Inquiry - Phillips Precision Lean Fixture Plates and Clamps for CMM (Inspection Arsenal Series)

GET IN TOUCH
10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772
STAY CONNECTED
LIKE & FOLLOW US