Imada 180 Degree Peel Tester (IPTS Series)

Share:


Imada 180 Degree Peel Tester (IPTS Series)

IPTS-20N/50N Series
 
IPTS-20N/50N high speed peeling tester with 20N and 50N capacity specialized for 180-degree peel strength test presented by MSP Metrology (M) Sdn Bhd from Imada Japan

 

Features

 

IPTS-20N/IPTS-50N

High Speed Peeling Tester

This is 180 degree peel tester with capacity 20N or 50N. It peels film or adhesive tape at an angle of 180 degrees (maximum peeling speed: 1500mm/min) and measures its peeling strength and adhesive strength. Next Series with firmware version 5 or later offers improved measurement stability thanks to low noise, expandability through the addition of functions (firmware download) on the dedicated website (IMADA-Connected.com), and the convenience of downloading various software and instruction manuals.

 

  • Ideal for 180-degree peel test of a wide range of samples such as adhesive tapes, which can be tested in accordance with the corresponding part of ISO, JIS, etc.
  • High sampling rate (2000Hz) for accurate results, capturing small changes and accurate peak values by following rapid changes of force
  • User-friendly operation with easy sample setup and one-click operation (simply press the START button to start the test and record data)
  • Allows accurate analysis capturing small changes with high sampling rate (2000Hz) and visual analysis with graph overlay function (up to 5 graphs) by the supplied graphing software
  • Next Series (Firmware Ver.5 or later) equips extended functions such as additional functions and software downloads from IMADA download site



Standards

  •     ISO 8510-2 (2006) [Adhesives-Peel test for a flexible-bonded-to-rigid test specimenassembly-Part 2: 180° peel] (corresponding part only)
  •     ISO 29862 (2007) [Self adhesive tapes-Determination of peel adhesion properties] (corresponding part only)
  •     JIS Z0237 (2009) [Self adhesive tapes-Determination of peel adhesion properties] (corresponding part only)
  •     JIS K6854-2 (1999) [Adhesives-Determination of peel strength of bonded assemblies] (corresponding part only)
  •     Japanese Pharmacopoeia (17th Edition) [180 degree peel testing method] (corresponding part only)

 

Samples

Stickers, adhesive tape, screen protector film for smartphone, low-friction silicon rubber sheet, laminated package, adhesive tape for first-aid, double postcard (two attached postcards), magnetic tape, electrode’s line of solar cell, copper foil of circuit board, and more

 


 

Accurate Graphing

It captures rapid force change due to its high sampling rate (2000Hz) thus ensures high repeatability

One-click operation

Simply press the START button to start the test. It peels the sample to the set stroke (peel length)

Automatic Recording

Automatic recording, graphing and saving data when testing

Visual analysis

Overlays Max. 5 graphs to allow easy comparison and visual analysis. Automatically calculates Max/Min/Ave values of each graph and shows them in the same table

 


 

 


 

Force Recorder Standard Software

 


 

Features

  • Ideal for 180-degree peel test of a wide range of samples such as adhesive tapes, which can be tested in accordance with the corresponding part of ISO, JIS, etc.
  • High sampling rate (2000Hz) for accurate results, capturing small changes and accurate peak values by following rapid changes of force
  • A wide range of test speed of 120/200/300/500/1000/1500mm/min (Switchable by a knob)
  • One-click operation (simply press the START button to start the test and record data)
  • Allows accurate analysis capturing small changes with high sampling rate (2000Hz) and visual analysis with graph overlay function (up to 5 graphs) by the supplied graphing software

 


 

Specifications

Japan Model  IPTS-20N  IPTS-50N
US Model IPTS-4 IPTS-11
Capacity  20N 50N
Resolution  0.01N
Accuracy  +/-0.2%F.S. +/-1digit
Overload Approx.150%F.S
(It warns with light flashing and buzzer when the force is over 110% of capacity.)
Sampling rate  Max.2000 data / sec (2000Hz)
Test speed  120, 200, 300, 500, 1000, 1500mm/min (Switchable)
Stroke (length)  Travel of load cell: Approx. 400mm (Peel length: Approx.200mm)
Peel angle  165°-180° (Height and angle are adjustable.)
Max. sample width  Adhesion: 88mm (Grip: 20mm, Clamp: 50mm)
Max. sample thickness  Grip: 3mm
Clamp: 13mm
Safety device  Emergency stop button, Overload prevention
(Valid only when the power is ON) (*1)
Power  AC100 to 240V free input (*2)
Weight  Approx. 11kg
Operating environment  Temperature: 0 to 40°C Humidity: 20 to 80%RH
Accessories  Force Recorder Standard (graphing software), USB cable, Power cable,
Film grip, Spacer block, Inspection certificate, Instruction manual

*1 It does not guarantee complete protection against overload.
*2 Please specify the voltage when you order. (Accessory varies depending on voltage.)

 


 

Software Specifications

Data transferring speed  Max. 2000 data / sec (2000Hz)
Recording data point  Max. 7.2 million
Graph  Graph overlaying function, Capture function, Graph scaling, Statistics output, Point marking
Graph recording  Trigger function
Edit  Comment, Add notes, Borderline function
Output  Printing (A4, letter size), CSV, Word, Excel, PDF
OS  Windows 7/8/8.1/10
Hardware CPU: Pentium4 (1GHz or more) or more is recommended
Memory: 2GB or more is recommended
Hard disk (data storage area): 10GB or more is recommended
Plat form  NET Framework4.6 or later
Execute environment  Microsoft Internet Explorer 6 or later
Windows installer 3.1 or later
Image size  Resolution 1024×768 pixel or more
Connection port  USB1.1, USB2.0 connecor
* Operation in USB 3.0 has not been varified.

* Some old versions of Excel show data up to 65,531 only

 


 

Dimension




 


 

IPTS-5N

180° Peeling Tester

Peel Strength Tester has capacity of 5N and measures the peel strength of cover tapes of embossed carrier tapes that contain semiconductors and electronic components in accordance with JIS and other industrial standards. Next Series with firmware Ver. 5 or later offers improved measurement stability due to low noise, expandability with the ability to add functions on a dedicated website ((MADA-Connected.com), and the convenience of downloading various software and instruction manuals.

 

  • Designed for peeling test of embossed carrier tape complying with IEC and JIS standard
  • High sampling rate (2000Hz) for accurate results, capturing small changes and accurate peak values by following rapid changes of force
  • User-friendly operation with easy sample setup and one-click operation (simply press the START button to start the test and record data)
  • Allows accurate analysis capturing small changes with high sampling rate (2000Hz) and visual analysis with graph overlay function (up to 5 graphs) by the supplied graphing software
  • Next Series (Firmware Ver.5 or later) equips extended functions such as additional functions and software downloads from IMADA download site

 

Features

 

IPTS-5N is peeling tester with 5N capacity. It is specialized for peeling test of embossed carrier tape complying with IEC and JIS standard.

Standards

  •     IEC 60286-3 (2013) [Packaging of components for automatic handling] (corresponding part only)
  •     JIS C0806-3 (2014) [Packaging of components for automatic handling] (corresponding part only)

 

 


 

Accurate Graphing

It captures rapid force change due to its high sampling rate (2000Hz) thus ensures high repeatability

One-click operation

Simply press the START button to start the test. It peels the sample to the set stroke (peel length)

Automatic Recording

Automatic recording, graphing and saving data when testing

Visual analysis

Overlays Max. 5 graphs to allow easy comparison and visual analysis. Automatically calculates Max/Min/Ave values of each graph and shows them in the same table

 


 

 


 

Force Recorder Standard Software

 


 

Features

  • Designed for peeling test of embossed carrier tape complying with IEC and JIS standard
  • High sampling rate (2000Hz) for accurate results, capturing small changes and accurate peak values by following rapid changes of force
  • User-friendly operation with easy sample setup and one-click operation (simply press the START button to start the test and record data)
  • Allows accurate analysis capturing small changes with high sampling rate (2000Hz) and visual analysis with graph overlay function (up to 5 graphs) by the supplied graphing software
  • A wide range of test speed of 120/200/300/500/1000/1500mm/min (Switchable by a knob)

 


 

Specifications

Japan Model  IPTS-5N
US Model IPTS-1
Capacity  5N
Resolution  0.001N
Accuracy  +/-0.2%F.S. +/-1digit
Overload Approx.150% F.S
(It warns with warning buzzer and light flashing when the force is over 110% of capacity.)
Sampling rate  Max.2000 data / sec (2000Hz)
Test speed  120, 200, 300, 500, 1000, 1500mm/min (Switchable)
Stroke (length)  Travel of load cell: Approx. 400mm (Peel length: Approx.200mm)
Peel angle  165°-180° (Height and angle are adjustable.)
Max. sample width  Adhesion: 88mm (Film clip: 40mm, Sample clip: 95mm)
Max. sample thickness  Cover film: 0.5mm
Safety device  Emergency stop button, Overload prevention (Valid only when the power is ON) (*1)
Power  AC100 to 240V free input (*2)
Weight  Approx. 11kg
Operating environment  Temperature: 0 to 40°C Humidity: 20 to 80%RH
Accessories  Force Recorder Standard (graphing software), USB cable, Power cable, Film clip, Inspection certificate, Instruction manual

*1 It does not guarantee complete protection against overload.
*2 Please specify the voltage when you order. (Accessory varies depending on voltage.)

 


 

Software Specifications

Data transferring speed  Max. 2000 data / sec (2000Hz)
Recording data point  Max. 7.2 million
Graph  Graph overlaying function, Capture function, Graph scaling, Statistics output, Point marking
Graph recording  Trigger function
Edit  Comment, Add notes, Borderline function
Output  Printing (A4, letter size), CSV, Word, Excel, PDF
OS  Windows 7/8/8.1/10
Hardware CPU: Pentium4 (1GHz or more) or more is recommended
Memory: 2GB or more is recommended
Hard disk (data storage area): 10GB or more is recommended
Plat form  NET Framework4.6 or later
Execute environment  Microsoft Internet Explorer 6 or later
Windows installer 3.1 or later
Image size  Resolution 1024×768 pixel or more
Connection port  USB1.1, USB2.0 connecor
* Operation in USB 3.0 has not been varified.

* Some old versions of Excel show data up to 65,531 only

 


 

Dimension



 Inquiry - Imada 180 Degree Peel Tester (IPTS Series)

GET IN TOUCH
10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772
STAY CONNECTED
LIKE & FOLLOW US