Matsuzawa Automatic Hardness Test System (AMT Series)

Share:


Matsuzawa Automatic Hardness Test System (AMT Series)

Fully Automatic Hardness Tester System – AMT series for Vickers, Knoop, Brinell Hardness Testing by MSP Metrology (M) Sdn Bhd from Matsuzawa Japan

 

Features

Flexible Auto-focus & Auto-reading function

An automatic focus and reading can be done smoothly and accurately. Even if some samples with rough surface are mixed, they can be measured accurately by only selecting set values.

 


 

Flexible measurement function

Flexible measurement function can perform the measurement corresponding to various conditions

 


 

Auto-trace function

The shape of the specimen is traced by the automatic operation.

 


 

The line origin function

The starting point of the measurement line can be by the shape trace based on the image.

 


 

Series Line-up

 


 

Specifications

System Configurations

Type Name Data Handing Automatic Stage Automatic Reading
PMT/PVT SERIES Automatic Reading System O O
AMT/AVT – S SERIES Automatic Stage System O O
AMT/AVT – PS SERIES Automatic Stage-Reading System O O O
AMT/AVT – FS SERIES Automatic Stage-Reading-Focus System O O O

 

Series PS Series PMT/PVT Automatic Reading Function Test Mode

Automatic Mode (AMT/AVT Series Only • Two or more dents are stricken by setting the pattern of an automatic stage • Dents continuous reading)

Single Action Mode (The dent is stricken to one point • Dent Reading)

OS Support For Windows 7
Test Scale Vickers Hardness (HV) • Knoop Hardness (HK) • Fracture Toughness (KC) (Manual Measurement only) • Cylinder Correction (Option)
CCD Camera Inter line method 1/3 inch 0.8Megapixel Monochrome (Correspondence to the your preferred pixel count: Option)
Reading Speed  Shortest 0.5sec/1 point (Depending on the sample surface)
Reading Reproducibility  ±0.5% (Test force: 9807mN, 700HV, for 40x Object Lens)
Unit of min Measurement 0.1µm
Minimum Indentation Reading 10µm For (For 40x Object lens)
Manual Measuring Manual measurement in PC monitor by mouse operation • Measuring with measurement microscope (Option) • PC transfer function of measurement data with measurement microscope (Option)
Display Magnification About 1600x (For 40x Object lens) • About 800x (For 20x Object lens) • About 400x (For 10x Object lens) • About 200x (For 5x Object lens) in case of AVT/PVT Series, magnification is around half
  About 70µm (For 40x Object lens) • About 140µm (For 20x Object lens) • About 280µm (For 10x Object lens) • About 560µm (For 5x Object lens) in case of AVT/PVT Series, measurement view is around twice
Languages Japanese • English (Choice when ordering)
Test Data Preservative Form Special Format • XLS Format
Graph Display Hardened Layer Depth • Maximum Value • Minimum Value • X and Y axis single distance display •Parameter setting
Print Output Three standard format selection (Graph only, Data only, Graph and Data), corresponding to special format (Option)
Other Function

Judgement function by diagonal length ratio

  • Flexible reading function (Four automatic reading setting values arbitrarily set are easily selected
  • Confirmation mode function (AMT-X/AVT-X only)
S Series Automatic Operation X-Y Axis Stage Drive System Stepping Motor
Stage Operation Stage control box operation (An arbitrary speed can change) or Icon operation in software (The speed can change by two stages)
Stage Size X • Y 110 x 110mm for each (Will correspond to your desired size: Option)
Movement X • Y 50 x 50mm for each (Will correspond to your desired size: Option)
Least Command Increment 1µm
Movement Speed 0.05 ~ 5mm/sec Possible to change voluntarily within the range
Movement Program Pattern
  • Straight line (Specify starting and ending point,  Pitch specifications, Pitch changeability specifications, ∴ All plovers can be set)
  • Circular Arc
  • Circle
  • Teaching
  • Trace
  • Coordinates rotation
  • Auto trace (Following of shape • Line starting point setting
Test Points Max 16,000 points (Max 2,000 points in one line • Up to 6 lines can be set)
Other Functions Real time graphical display of test position, Click movement function, Dry run function, Offset function of indentation position when replacing the indenter ∴ Corresponding to exclusive pattern setting program (option), please consult.
Automatic Z-axis Stage Drive System Stepping Motor (Built-in tester body)
Auto-Focus Speed Shortest 3sec/1 point (Depending on the sample surface) ∴ Auto/manual switchable
Movement Speed 0.05 ~ 5mm/sec Possible to change voluntarily within the range
Least Command Increment AMT Series: 0.05µm, AVT Series: 0.5µm
Other Function Stage evasion function when rotates, Automatic focus optional function (Four automatic reading setting value arbitrarily set are easily selected)
PMT/PVT, AMT/AVT Series Other Measurement Microscope (Option) For measuring with measurement microscope
AMT/AVT Series Safeguard Against Malfunction    XY Automatic stage immediate end with emergency stop button (Standard Specifications). Operation immediate end by auto turret lathe rotation, collision in auto-focus, and overruning (option)
Max Specimen Size

Depth: AMT Series: 160mm, AVT Series: 150mm

Height: AMT-S/PS/FS Series: 110mm, AVT-S/PS Series: 190mm, AVT-FS Series:100mm

 


Japan Matsuzawa Automatic Hardness Testing System : AMT-X7FS Series


 Inquiry - Matsuzawa Automatic Hardness Test System (AMT Series)

GET IN TOUCH
10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772
STAY CONNECTED
LIKE & FOLLOW US