Manual Micro Vickers Hardness Tester MMT series for Micro Vickers Hardness Testing by MSP Metrology (M) Sdn Bhd from Matsuzawa Japan
Realize 0.01μm measurement at general magnification of 200x – 1,000x.
Possible to measure with accurate numerical value about a small indentation.
WIDE TEST LOAD RANGE
By wide test load range of 9 level(type A) and 12 levels(type B), testing of 1-2000gf can be done.
TESTING AREA OF INDUSTRY MAXIMUM CLASS
By a new design, testing range of specimen height 120mm and specimen depth 160mm was secured
THE UNIQUE TURRETT
The turret which mounted with two indenter and four objective lens following conventional stable loading mechanism.
COLOR LCD TOUCH PANEL
Visibility and operativity improve by color LCD. Equipped with the assist function that can identify the most suitable measurement condition
LINE UP IN LCD MODEL
Clear specimen surface image magnified on LCD monitor is displayed. Because the measurement knob is placed in the measurement panel, you can significantly reduce the fatigue of working long hours
After the equipment is installed with probe, it can be used to measure the following parameters:
- Height, width, length
- The angle between the two sides
- Vertical angle of cone
- Diameter of cylinder
- Straightness, flatness, roundness, cylindricity
- Verticality, parallelism, inclination, and so on.
Coaxial Light Source with Different Effect
4-ring 8-division LED Surface Illumination
LED Parallel Contour Illumination
Video Capture Card
Calibration Glass Stage
Data Integration Box
Inquiry - Matsuzawa Micro Vickers Hardness Tester (MMT Series)