Imada Simple Type Horizonal Motorized Test Stand (MH2 Series)

Share:


Imada Simple Type Horizonal Motorized Test Stand (MH2 Series)

MH2 Series

Horizontal Motorized Test Stand

Horizontal Motorized Test Stand MH2 series is standard type with 500N to 2500N capacity. It is functional yet user-friendly model with easy operation. The horizontal design allows applying force horizontally. Its rugged design provides solutions for complex testing.

 

  • Achieves high repeatability with constant testing speed and position, high rigidity, and allows applying force horizontally due to horizontal design
  • Handles various testing such as durability or compression testing with digital setting of speed, counter function (number of tests to repeat), and timer function (pausing time)
  • Handles a wide range of testing applications to meet your testing requirements with options such as -FA (inner linear scale)
  • Enhances testing efficiency and safety with option -CN (I/O for external signals), allowing for communication for interlock and starting operation, etc.
 
 
  • Three Modes of Operation

  • Force Control

  • Maintain Force Between High/Low Setpoints

  • Increase Force to High Setpoint and Stop




     

    High Repeatability
  • Constant testing speed and direction for applying compression and tensile force.
  • Rugged design minimizes influence of deformation (0.5mm or less).
 
Easy Operation
  • Inclined control panel for easy operation.
  • Easy dial operation for digital value.
  • Three testing modes to meet testing requirements.
 
High Versatility for various testing
  • Ideal for durability test by setting the number of test cycles to repeat.
  • Useful timer function for compression testing allows pausing at a set force value. (*)
  • The table is able to fix various attachments.
  • Optional functions for various purposes.
  • Convenient frame for fixing a table and attachment
 
Functions for efficient testing
  • Easy setting of travel distance according to the sample size.
  • Automatically changes traveling and measuring speed at a set force value. (*)
  • Software records automatically according to stand operation.(*)



 
 


Standard Features

 
  • Selectable Manual, Increment, Single Cycle, Continuous Cycle and Force Control (with Z Series gauges)
  • Easy-to-use program dial and menu screens control mode, speed, timer, cycles
  • Ultra rigid, .5 mm deflection at maximum load
  • Programmable timer up to 99′ 59.9 sec in 0.1 sec increments
  • Conditional Overload Prevention
  • Up to 65,535 cycles
  • Stroke: 9″ (230mm)


Three Modes of Operation

The MH2 motorized test stand includes three modes of operation: Jog, Manual, Cycle Mode. MH2 features unique jog movement control, for precise increment testing. In jog mode, each click of the program dial moves the cross head approximately 0.05mm (see specifications for more details). Manual mode allows the user to control the crosshead using the arrow buttons. In cycle mode, automated cycle tests are easy to setup.  Control start, measuring and return speeds independently.
 

Force Control

Force controlled non-destructive tests are also easy to setup and program. Connect an Imada ZT Series force gauge to the MH2 test stand to enable two force controlled modes and Conditional Overload Prevention.
 

Maintain Force Between High/Low Setpoints 

Initial cross head speed is controlled by the start speed setting. Force control activates when applied force exceeds the low setpoint (and below the high setpoint) on the ZT series force gauge. The cross head maintains force between the low and high setpoint for the specified hold time,and then returns to the start position.
 

Increase Force to High Setpoint and Stop

Initial cross head speed is controlled by the start speed setting. When the applied force reaches the low set point of the ZT series force gauge, the test stand engages the measuring speed setting. The gauge stops when the applied force reaches the high set point on the ZT series force gauge. Ideal for non-destructive or creep testing. The cycle is repeated until the counter limit is reached.

 


Specifications
 

Japan Model MH2-500N  MH2-2500N
US Model MH2-110 MH2-550
Capacity 500N 2500N
Speed Digital 10 to 300mm/min
[10 – 20mm/min: by 0.5mm/min]
[20 – 100mm/min: by 5mm/min]
[100 – 300mm/min: by 10mm/min]
Max. Sample Height (*1) Approx. 245mm Approx. 340mm
Rigidity [Standard models] 0.5mm or below
Stroke Limit  Manual / Jog / Cycle mode
Measuring Modes Counter (number of tests to repeat): Max. 65535 times
Timer (pausing time): Up to 99 min 59 sec 9 (by 0.1 sec)
Functions Emergency stop, force control (*2), overload prevention (*2, *3)
Control 0 to +40 degree Celsius
35 to 70% (avoid condensation)
Voltage AC100 to 240V, 50/60Hz
(Select from 100, 120 and 230V. Accessories are provided accordingly.)
Power Consumption 50W
Weight Approx. 14kg Approx. 27kg
Accessories Operation manual, power cable, spare fuse, tools, grip mounting plate, warranty certificate Operation manual, power cable, spare fuse, tools, attachment mounting plate (GF-2), warranty certificate
Available Options (*4) (*5) -CN: External signal input
-S: Length scale
-FA: Inbuilt liner scale
-V45: Speed 1.5 to 45mm/min
-V90: Speed 3 to 90mm/min
-V450: Speed 15 to 450mm/min
-V600: Speed 20 to 600mm/min
-V900: Speed 30 to 900mm/min
-CN: External signal input
-S: Length scale
-FA: Inbuilt linear scale
-V75: Speed 2.5 to 75mm/min
-V150: Speed 5 to 150mm/min
Mountable Force Gauge (*6) Mechanical Force Gauge: FB, PS, PSM series
Digital Force Gauge: DST, DSV, ZTS, ZTA series (1000N or lower)
Load cell: DPU series (500N or lower)
Mechanical Force Gauge: FB, PS, PSM PSH series
Digital Force Gauge: DST, DSV, ZTS, ZTA series
Load cell: DPU series (500N or lower), DPU series (1000~5000N)(*7)
*1 Max. sample height refers to the distance between the table and the tip of force gauge measuring shaft when the head is at the top. (With up to 1000N model of ZTS/ZTA series)
*2 ZTS/ZTA series force gauge and optional cable CB-518 are required.
*3 It does not guarantee complete protection against overloading.
*4 Add the option code after the model name to complete the model with options. e.g. When adding long stroke option to MH2-500N … Model: MH2-500N-L
*5 Capacity is reduced as below by some speed change options of MH2-500N. -V600 capacity 250N, –V900 capacity 150N
*6 Ensure to use within the capacity of force gauge and test stand regardless of the mountable models.
*7 Mounting block is required to be attached to the DPU series (1000~5000N)


 Inquiry - Imada Simple Type Horizonal Motorized Test Stand (MH2 Series)

GET IN TOUCH
10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772
STAY CONNECTED
LIKE & FOLLOW US