Imada Standard Type Vertical Motorized Test Stand (MX2 Series)


Imada Standard Type Vertical Motorized Test Stand (MX2 Series)

Category: Force Stand, Force Stand

Brand: Imada

Vertical Motorized Test Stand MX2 series is standard type with 500N to 5000N capacity by MSP Metrology Sdn Bhd from Imada Japan


Improved Repeatability
  • Constant testing speed and position for applying compression and tensile force
  • Rugged design minimized influence of deformation (max. 0.5mm)

Versatility for a Wide Variety of Testing
  • Ideal for durability test by setting the number of test cycles to repeat.
  • Useful timer function for compression testing allows pausing at a set force value
  • Attached table can mount a wide range of grips and fixtures.

Easy Operation
  • Ergonomically inclined control panel
  • Dial operation for digital setting
  • Three testing modes to meet testing requirements

Functions for Efficient Testing
  • Easy setting of travel distance depending on the sample height
  • Automatically changes travelling and measuring speed at a set force value
  • Starts software together with test stand motion

* Requires certain models of force gauge and optional cable


Model MX2-500N MX2-1000N MX2-2500N
Capacity 500N (50kgf) 1000N (100kgf) 2500N (250kgf)
Max. height of a sample (*1) Approx. 235mm Approx. 300mm Approx. 320mm
Deflection at maximum load

[Standard models] less than 0.5mm

[Long stroke (optional)] less than 1.0mm

Test speed 10 to 300mm/min
Measuring Modes Manual mode, JOG mode, Cycle mode

Counter (number of tests to repeat): Max. 65535 times

Timer (pausing time): Up to 99 min 59 sec 9 (by 0.1 sec)

Control Emergency stop, force control (*2), overload prevention (*2, *3)
Operating temperature humidity

0 to +40 degree Celsius

35 to 70% (avoid condensation)

Power AC100 to 240V, 50/60Hz
(Selectable from 100, 120 and 230V. Accessories are provided accordingly.)
Weight Approx. 18kg Approx. 19kg Approx. 26kg
Available options (*4) (*5) Long stroke, external signal input, length scale, inbuilt liner scale, speed range changes
Accessories Operation manual, power cable, spare fuse, tools
GF-1 (Grip mounting adaptor) GF-2 (Grip mounting adaptor),
Mounting plate for high
capacity force gauge
GF-2 (Grip mounting adaptor),
Mounting plate for
standard force gauge
Mountable Force Gauge (*6)

Mechanical Force Gauge: FB, PS, PSM series

Digital Force Gauge: DST, DSV, ZTS, ZTA series (up to 1000N)

Load cell: DPU series (up to 500N *7)

Mechanical Force Gauge: PSH series

Digital Force Gauge: ZTS, ZTA series (Over 2500N)

*1 Max. sample height refers to the distance between the table and the tip of force gauge measuring shaft when the head is at the top.
(MX2-500N/MX2-1000N: with up to 1000N model of ZTS/ZTA series mounted.)
(MX2-2500N: With over 2500N model of ZTS/ZTA series mounted.)

*2 ZTS/ZTA series force gauge and optional cable CB-518 are required.

*3 It does not guarantee complete protection against overloading.

*4 Add the option code after the model name to complete the model with options.
e.g. When adding long stroke option to MX2-500N … Model: MX2-500N-L
*5 Capacity is reduced as below by some speed change options.
MX2-500N:-V600 capacity 250N, –V900 capacity 150N
MX2-1000N:-V750 capacity 500N, –V1000 capacity 250N

*6 Ensure to use within the capacity of force gauge and test stand regardless of the mountable models.

*7 Mounting block (sold separately) is required to mount over 1000N range of DPU to MX2-1000N/MX2-2500N.

 Inquiry - Imada Standard Type Vertical Motorized Test Stand (MX2 Series)

Fill out the form below and we'll be in touch soon.

10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772

Ⓒ 2018-2022 MSP Metrology (M) Sdn Bhd (201301013617 / 1043455-P) | Privacy Policy

Visitor :

Powered by NEWPAGES