Imada Simple Type Vertical Motorized Test Stand (MX Series)

Share:


Imada Simple Type Vertical Motorized Test Stand (MX Series)

Category: Force Stand, Force Stand

Brand: Imada

Vertical Motorized Test Stand MX series is simple type with 500N to 1000N capacity by MSP Metrology Sdn Bhd from Imada Japan


Featured


 
Simple Operation
  • To perform test, you just press the button
  • The force gauge travels between the limit knobs on the side of the column at the setting or the fastest speed.

Easy Setup for Test Conditions
  • MX series is adjustable the testing speed with dial
  • The travelling distance is adjustable by positioning the limit knobs

Four Modes of Operation

MX test stands include four modes of operation: Manual, Single Cycle, Continuous Cycle (72 hours max.), and Force Control modes.

 


Use with Imada ZT Series

MZ series activates the useful functions when connected with Imada ZT series digital force gauge.

 
* Requires certain models of force gauge and optional cable 

 


Specifications


Model MX-500N MX-1000N MX-5000N
Capacity 500N (50kgf) 1000N (100kgf) 5000N (500kgf)
Stroke when a force gauge is mounted(*1) 235mm 420mm 340mm
Test speed 10 to 300mm/min 8 to 240mm/min 10 to 300mm/min
Gauges that can be combined (*2) Any force gauges except high capacity model force gauges Mechanical / Digital Force gauges
Load cell can NOT be combined.
Function Manual mode, Single mode, Continuous mode
Control Emergency button, Operation control by load value(*3), Overload prevention(*3)(*4)
Safety Device Stroke limit, emergency stop button
Power AC100V to 240V, free input
Weight Approx. 13kg Approx. 24kg Approx. 30kg
Option Long stroke, Speed range change, Encoder
Accessory GF-1 (Grip mounting adaptor) Grip mounting adapter(GF-2)
Instruction manual, Power cable, Gauge mounting plate, Cover, Spare fuse, and Tools.

*1 Stroke is, in other words, max distance from the tip of a ZT series force gauge to a test stand’s table.
*2 Please contact us if you would like to combine other force gauges or load cells with the test stand.
*3 Only valid with ZT series digital force gauge and dedicated cable.
*4 We cannot ensure the perfect prevention against sensor break-down.


 Inquiry - Imada Simple Type Vertical Motorized Test Stand (MX Series)

Fill out the form below and we'll be in touch soon.

GET IN TOUCH
10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772
STAY CONNECTED
LIKE & FOLLOW US

Ⓒ 2018-2022 MSP Metrology (M) Sdn Bhd (201301013617 / 1043455-P) | Privacy Policy

Visitor :

Powered by NEWPAGES