Imada Digital Force Gauge (ZT Series)

Share:


Imada Digital Force Gauge (ZT Series)

Category: Force Gauge, Force Gauge

Brand: Imada

ZTA Series: 
 
Force Gauge ZTA series offers all ZTS functions with additional features (displacement I/O) with 2N to 1000N capacity to perform the push pull gauge testing presented by MSP Metrology Sdn Bhd from Imada Japan

Features


ZTA Series

High Functionality Model Digital Force Gauge

Digital force gauge ZTA series is high functionality model with 2N to 1000N capacity. ZTA series offers all ZTS functions with additional features including displacement I/O and direct connection to USB flash drive, which enables direct data storing without PC.

 


 


Electro Luminescent EL Display

The display shows force value, unit and peak. Can be configured with additional user-selectable data include memory data, -NG count, high/low set point, 1st and 2nd peaks, displacement value and etc.

 


 


USB Software Capabilities

Included with device driver and ZT logger data acquisition software. The ZT Logger can download data from gauge memory or capture continuous stream data at 10 dtat/second. Zero the gauge or capture data while at computer.

 

 


 

Specifications

  • High sampling rate (2000Hz) for accurate results, capturing small changes and accurate peak values by following rapid changes of force
  • Manages data via USB connection or saves continuous data to USB flash drive directly without PC
  • Reduces risk of misreading values with easy-to-read high luminance organic EL display
  • Improves efficiency of testing using the equipped I/O functions for combining with external devices, and enables foce vs. displacement testing*FA version test stand and optional cable are required
  • Enables complex measurement such as material characteristic evaluation with optional software Force Recorder Professional available for real-time graphing of force vs. time/displacement *FA version test stand and optional cable are required
Model  ZTA
Feature Advanced model with various functions such as data saving in USB memory stick, displacement I/O and more.
Accuracy +/-0.2%F.S.+/-1digit
Unit of measurement(*1) N, kgf, lbf (*2)
Display 4-digit Organic EL
Display update 16 / sec
Sampling rate 2000 data / sec at maximum (*3)
Battery 8 hours (2 hours charge) (*4)
Safe overload rating Approx.200%F.S.
Operating environment Temperature: 0 to +40 degree Celsius, Humidity: 20 to 80%RH
Function Customized display (header and footer), Peak hold (tension and compression), Internal 1000 points data memory, Comparator (judgment of OK or NG), Reversible display, Sign inversion, Zero clear timer, +NG alarm, Off timer (auto power off), Dumping, Time display, 1st/2nd peak, Displacement detection at force peak value, Displacement zero reset at selected force, setting lock
Output USB, RS232C, Mitutoyo digimatic (*5), 2 VDC analog output (D/A),
Comparator 3 steps (-NG/OK/+NG), Overload alarm, Sub comparator 2 steps (output of large or small judgment), USB flash drive, Displacement.
Overload warning Approx.110%F.S. (Warning message and alarm )
External connecting switch SEND (a point of contact holding), Zero reset, Peak ON/OFF setting
Available linear scales (*6) – Online driver output (a line receiver according to RS422/485 must be built in.)
– Open collector output (Voltage drop between contacts must be smaller than 0.5V.)
Weight From 2N to 1000N model: Approx.490g (*7)
2500N, 5000N: Approx.1100g (*7)
Dimensions Please refer to dimensions.
Accessory AC adapter, Inspection certificate, CD driver (including simple software for data logging),
Attachments (The set of attachments varies according to range.), USB cable, Carrying case, Adaptor for USB flash drive. (*8)

*1 These are the specifications for International model. Please note that this unit is different from Japanese domestic model and international one.
*2 [N indication] The indication of 2N and 5N models is mN or N. The indication of 1000N,2500N and 5000N model is N or kN.
[kgf indication] The indication of 2N and 5N models is gf.
[lbf indication] The indication of 2N and 5N models is ozf.
*3 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec)
*4 The battery is more consumed when connected to USB flash drive or a linear scale.
*5 Not always available for Mitutoyo digimatic products.
*6 Some linear scales could not be available even if they meet the mentioned specifications.
*7 Weight is slightly different according to range.
*8 USB flash drive is not included.

 

Model  Capacity  Display  Resolution  Thread  Included attachment
ZTA-2N 2N 2.000N (2000mN) 0.001N (1mN) M6 A1 to A8
ZTA-5N 5N 5.000N (5000mN) 0.001N (1mN)
ZTA-20N 20N 20.00N 0.01N
ZTA-50N 50N 50.00N 0.01N
ZTA-100N 100N 100.0N 0.1N
ZTA-200N 200N 200.0N 0.1N S1 to S8
ZTA-500N 500N 500.0N 0.1N
ZTA-1000N 1000N 1000N (1.000kN) 1N (0.001kN) RS1, S2 to S8
ZTA-2500N 2500N 2500N (2.500kN) 1N (0.001kN) M10 B1 to B8
ZTA-5000N 5000N 5000N (5.000kN) 1N (0.001kN)

 


 

Video

 

 


ZTS Series

 
Digital force gauge ZTS series is functional yet user-friendly model with 2N to 1000N capacity to perform the push pull gauge testing presented by MSP Metrology Sdn Bhd from Imada Japan

 

Features


ZTS Series

Standard Model Digital Force Gauge

Digital force gauge ZTS series is functional yet user-friendly model with 2N to 1000N capacity. It offers a wide range of testing solutions from simple peak measurement to highly repeatable measurement. It comes with data logging software for easy data management.

 

 


 


Electro Luminescent EL Display

The display shows force value, unit and peak. Can be configured with additional user-selectable data include memory data, -NG count, high/low set point, 1st and 2nd peaks, displacement value and etc.

 


 


USB Software Capabilities

Included with device driver and ZT logger data acquisition software. The ZT Logger can download data from gauge memory or capture continuous stream data at 10 dtat/second. Zero the gauge or capture data while at computer.

 

 


 

Specifications

  • High sampling rate (2000Hz) for accurate results, capturing small changes and accurate peak values by following rapid changes of force
  • Manages data via USB connection or saves continuous data to USB flash drive directly without PC
  • Reduces risk of misreading values with easy-to-read high luminance organic EL display
  • Improves efficiency of testing using the equipped I/O functions for combining with external devices, and enables foce vs. displacement testing*FA version test stand and optional cable are required
  • Enables complex measurement such as material characteristic evaluation with optional software Force Recorder Professional available for real-time graphing of force vs. time/displacement *FA version test stand and optional cable are required
Model  ZTS
Feature Standard model with high functionality and usability.
Accuracy +/-0.2%F.S.+/-1digit
Unit of measurement(*1) N, kgf, lbf (*2)
Display 4-digit Organic EL
Display update 16 / sec
Sampling rate 2000 data / sec at maximum
Battery 8 hours (2 hours charge)
Safe overload rating Approx.200%F.S.
Operating environment Temperature: 0 to +40 degree Celsius, Humidity: 20 to 80%RH
Function Customized display (header and footer), Peak hold (tension and compression), Internal
1000 points data memory, Comparator (judgment of OK or NG), Reversible display, Sign
inversion, Zero clear timer, +NG alarm, Off timer (auto power off), Dumping,
Time display, Setting lock
Output Overload warning USB, RS232C, Mitutoyo digimatic (*3), 2 VDC analog output (D/A),
Comparator 3 steps (-NG/OK/+NG), Overload alarm
Approx.110%F.S. (Warning message and alarm )
External connecting switch SEND (a point of contact holding), Zero reset, Peak ON/OFF setting
Weight From 2N to 1000N model: Approx.490g (*4)
2500N, 5000N: Approx.1100g (*4)
Dimensions Please refer to dimensions.
Accessory AC adapter, Inspection certificate, CD driver (including simple software for data
logging), Attachments (The set of attachments varies according to range.), USB cable,
Carrying case

 

*1 These are the specifications for International model. Please note that this unit is different from Japanese domestic model and international one.
*2 [N indication] The indication of 2N and 5N models is mN or N. The indication of 1000N,2500N and 5000N model is N or kN.
[kgf indication] The indication of 2N and 5N models is gf.
[lbf indication] The indication of 2N and 5N models is ozf.
*3 Not always available for Mitutoyo digimatic products.
*4 Weight is slightly different according to range.

Model  Capacity  Display  Resolution  Thread  Attachment Included
ZTS-2N 2N 2.000N (2000mN) 0.001N (1mN) M6 A1 to A8
ZTS-5N 5N 5.000N (5000mN) 0.001N (1mN)
ZTS-20N 20N 20.00N 0.01N
ZTS-50N 50N 50.00N 0.01N
ZTS-100N 100N 100.0N 0.1N
ZTS-200N 200N 200.0N 0.1N S1 to S8
ZTS-500N 500N 500.0N 0.1N
ZTS-1000N 1000N 1000N (1.000kN) 1N (0.001kN) RS1, S2 to S8
ZTS-2500N 2500N 2500N (2.500kN) 1N (0.001kN) M10 B1 to B8
ZTS-5000N 5000N 5000N (5.000kN) 1N (0.001kN)

 


 

Video

 

 



 Inquiry - Imada Digital Force Gauge (ZT Series)

Fill out the form below and we'll be in touch soon.

GET IN TOUCH
10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772
STAY CONNECTED
LIKE & FOLLOW US

Ⓒ 2018-2022 MSP Metrology (M) Sdn Bhd (201301013617 / 1043455-P) | Privacy Policy

Visitor :

Powered by NEWPAGES