Akasel Polishing Consumables (Polishing Cloth)

Share:


Akasel Polishing Consumables (Polishing Cloth)

Akasel Polishing Consumables – Polishing cloth remove the last deformation introduced during grinding, provide a highly reflective finish by MSP Metrology (M) Sdn Bhd from Akasel Denmark.


Features


 



Polishing

Polishing has to remove the last deformation introduced during grinding, and to provide a highly reflective finish so the samples can be examined on the microscope.

Soft cloths usually provide the best surface finish but tend to round the edges of the sample and create relief between phases of different hardness.

Hard cloths are good for planeness and edge retention, but tend to leave slight scratches on the surface.

Therefore, a compromise has to be found to create the best possible surface finish with the best planeness and least edge rounding, in the shortest possible time.

Our variety of polishing cloths provides, together with the correct abrasives, a solution to every polishing challenge. The cloths are available in two different versions; magnetic and self-adhesive.

Many laboratories are using a magnetic support disc for an easy exchange of grinding and polishing discs. In this case the polishing cloths on a steel base are the obvious choice. However, the self-adhesive cloths can also be used on magnetic support discs when they are applied on the Aka-Rhaco support disc. This will save money and reduce metallic waste.


Polishing Cloths

The polishing cloths contain a thick polymer barrier that keeps both abrasive and lubricant at the surface of the cloth to perform the most efficient polishing action.

Plaran and Paran-S are relatively hard cloths used for fine-grinding or prepolishing with 15 μm, 9 μm, 6 μm, 3 μm or 1 µm diamonds.

Silk, Daran, Ramda, Moran-U, Moran and Plural are gradually softer cloths for polishing with 9 – 0.25 μm diamonds.

Napal is used for final polishing with diamond abrasives of 1 μm and finer or for final oxide polishing.

Chemal is used for oxide polishing and especially suited for chemicalmechanical polishing.

The self-adhesive polishing cloths are equipped with a newly developed adhesive with low tack and a unique tab that assures easy placing and removal of the cloths. Unique is also the batch code printed directly onto the cloth back.

Without removing the liner from the back of the cloths, they can be used directly on Aka-Rhaco and thus on magnetic support discs. See section Magnetic Adaptation.

All magnetic polishing cloths are based on the cloths above, laminated on a steel disc. These steel discs are equipped with 3 tabs for easy removal from the magnetic support disc.


Characteristics


Cloth Material Fine Grinding Polishing Final Polishing Application
Plaran Woven Nylon 15 – 6 μm 3 μm ÷ Fine grinding of soft metals, polishing of hard material.
Plaran-S Non-woven Polyester 15 – 3 μm 6 – 1 μm ÷ Fine grinding of soft metals, polishing of hard material.
Silk 100% Woven Silk 9 μm 6 – 1 μm 1 – 0.25 μm
Oxide polishing
Fine grinding of ferrous metals, polishing and final polishing of harder materials and coatings.
Ramda Woven Acetate ÷ 3 – 1 μm 1 μm Polishing of all materials.
Daran Woven Acetate ÷ 6 – 1 μm 1 – 0.25 μm
Oxide polishing
Polishing of all materials.
Moran-U 100% Woven Wool   6 – 3 μm 1 μm Polishing and final polishing of non-ferrous and ferrous metals.
Moran 100% Woven Wool ÷ 6 – 3 μm ÷ Polishing of non-ferrous and ferrous metals.
Plural Flocked Viscose ÷ 3 – 1 μm ÷ Fast, one-step polishing of steels, sintered carbides and other hard materials. Polishing of unmounted samples.
Napal Flocked Viscose ÷ ÷ 1 – 0.25 μm
Oxide polishing
Final polishing of all materials.
Chemal Synthetic Foam ÷ ÷ Oxide polishing Chemical/mechanical final polishing of all materials.


Specifications


Self-adhesive polishing cloths, 32 mm dia.
Product no. Product name Contents GRWT kg
41031016 Aka-Plaran 32 mm dia. 25 pcs. 0.05
41032016 Aka-Plaran-S 32 mm dia. 25 pcs. 0.05
41032516 Aka-Daran 32 mm dia. 25 pcs. 0.05
41033016 Aka-Ramda 32 mm dia. 25 pcs. 0.05
41034016 Aka-Silk 32 mm dia. 25 pcs. 0.05
41035016 Aka-Moran 32 mm dia. 25 pcs. 0.05
41035116 Aka-Moran-U 32 mm dia. 25 pcs. 0.05
41036016 Aka-Plural 32 mm dia. 25 pcs. 0.05
41037016 Aka-Napal 32 mm dia. 25 pcs. 0.05
41039016 Aka-Chemal 32 mm dia. 25 pcs. 0.05
 
Self-adhesive polishing cloths, 200 mm dia.
Product no. Product name Contents GRWT kg
41201013 Aka-Plaran 200 mm dia. 5 pcs. 0.33
41202013 Aka-Plaran-S 200 mm dia. 5 pcs. 0.36
41202513 Aka-Daran 200 mm dia. 5 pcs. 0.32
41203013 Aka-Ramda 200 mm dia. 5 pcs. 0.31
41204013 Aka-Silk 200 mm dia. 5 pcs. 0.31
41205013 Aka-Moran 200 mm dia. 5 pcs. 0.37
41205113 Aka-Moran-U 200 mm dia. 5 pcs. 0.32
41206013 Aka-Plural 200 mm dia. 5 pcs. 0.35
41207013 Aka-Napal 200 mm dia. 5 pcs. 0.32
41209013 Aka-Chemal 200 mm dia. 5 pcs. 0.39
 
Self-adhesive polishing cloths, 250 mm dia.
Product no. Product name Contents GRWT kg
41251013 Aka-Plaran 250 mm dia. 5 pcs. 0.38
41252013 Aka-Plaran-S 250 mm dia. 5 pcs. 0.44
41252513 Aka-Daran 250 mm dia. 5 pcs. 0.37
41253013 Aka-Ramda 250 mm dia. 5 pcs. 0.35
41254013 Aka-Silk 250 mm dia. 5 pcs. 0.35
41255013 Aka-Moran 250 mm dia. 5 pcs. 0.46
41255113 Aka-Moran-U 250 mm dia. 5 pcs. 0.40
41256013 Aka-Plural 250 mm dia. 5 pcs. 0.42
41257013 Aka-Napal 250 mm dia. 5 pcs. 0.40
41259013 Aka-Chemal 250 mm dia. 5 pcs. 0.47
 
Self-adhesive polishing cloths, 300 mm dia.
Product no. Product name Contents GRWT kg
41301013 Aka-Plaran 300 mm dia. 5 pcs. 0.45
41302013 Aka-Plaran-S 300 mm dia. 5 pcs. 0.54
41302513 Aka-Daran 300 mm dia. 5 pcs. 0.44
41303013 Aka-Ramda 300 mm dia. 5 pcs. 0.41
41304013 Aka-Silk 300 mm dia. 5 pcs. 0.41
41305013 Aka-Moran 300 mm dia. 5 pcs. 0.59
41305113 Aka-Moran-U 300 mm dia. 5 pcs. 0.48
41306013 Aka-Plural 300 mm dia. 5 pcs. 0.51
41307013 Aka-Napal 300 mm dia. 5 pcs. 0.48
41309013 Aka-Chemal 300 mm dia. 5 pcs. 0.58
 
Self-adhesive polishing cloths, 350 mm dia.
Product no. Product name Contents GRWT kg
41351013 Aka-Plaran 350 mm dia. 5 pcs. 0.59
41352013 Aka-Plaran-S 350 mm dia. 5 pcs. 0.73
41352513 Aka-Daran 350 mm dia. 5 pcs. 0.60
41353013 Aka-Ramda 350 mm dia. 5 pcs. 0.54
41354013 Aka-Silk 350 mm dia. 5 pcs. 0.54
41355013 Aka-Moran 350 mm dia. 5 pcs. 0.80
41355113 Aka-Moran-U 350 mm dia. 5 pcs. 0.65
41356013 Aka-Plural 350 mm dia. 5 pcs. 0.68
41357013 Aka-Napal 350 mm dia. 5 pcs. 0.65
41359013 Aka-Chemal 350 mm dia. 5 pcs. 0.79
 
Magnetic polishing cloths, 200 mm dia.
Product no. Product name Contents GRWT kg
42201013 Mag-Plaran 200 mm dia. 5 pcs. 0.88
42202013 Mag-Plaran-S 200 mm dia. 5 pcs. 0.92
42202513 Mag-Daran 200 mm dia. 5 pcs. 0.87
422023013 Mag-Ramda 200 mm dia. 5 pcs. 0.86
42204013 Mag-Silk 200 mm dia. 5 pcs. 0.86
42205013 Mag-Moran 200 mm dia. 5 pcs. 0.92
42205113 Mag-Moran-U 200 mm dia. 5 pcs. 0.89
42206013 Mag-Plural 200 mm dia. 5 pcs. 0.90
42207013 Mag-Napal 200 mm dia. 5 pcs. 0.89
42209013 Mag-Chemal 200 mm dia. 5 pcs. 0.94


 Inquiry - Akasel Polishing Consumables (Polishing Cloth)

GET IN TOUCH
10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772
STAY CONNECTED
LIKE & FOLLOW US