Share:
Shimpo Motorized Force Gauge Stands (Vertical Type) (FGS-100VC Series)
Brand: Shimpo
Category: Force Stand, Force Stand
A motorized force gauge stands that can measured loads ranging from 2 to 2,500 N (0.2-250 kg) by MSP Metrology (M) Sdn Bhd from Shimpo Japan.
Features
Extend Range of “Force” Measurement
Adds the motorized types to the vertical type stands.
Actualizes high accuracy measurement in a wider range of application.
Can install various force gauges.
A Wider Range of Loads
Loads ranging from 2 to 2,500 N (0.2-250 kg) can be measured. Various types of digital force gauges can be mounted.
Note: Digital force gauges are sold separately.
(Digital force gauges other than the FGP Series listed above can be mounted as well. However, please note that separate adapter plates are required to mount them.)
Easy to Use
Uses an LCD on the operation panel
- Key switch layout for easy operation
- For switching operation modes
- For setting travel speed
- For displaying distance and travel speed
Longer Stroke
The mounted force gauge can be moved by up to 400 mm to perform various types of tests.
Wider Speed Range
The wide travel speed range (10-400 mm/min) allows the force gauge to respond to various test conditions.
Specification
| Model | FGS-100VC | FGS-250VC | |
| Measurement load | 1000N (100kg) | 2500N (250kg) | |
| Endurance load | 1000N (100kg) | 2500N (250kg) | |
| Forward speed | 10 to 400mm/min | ||
| Sets the speed using the operation panel | |||
| Stroke | 400mm | ||
| Flexural rigidity | ±0.5mm (distance between the gauge tip and table) when the maximum load is applied | ||
| Display parts | Dot matrix LCD Signed 4-digit | ||
| Display | Movement speed display | 10 to 400mm/min | |
| Movement distance display | 0.0 to 400.0mm | ||
| Repetition count display | 0 to 9999 | ||
| Action mode | MUNU mode: Movement towards dog/JOG mode: Jogging/SING mode: Rotational movement between dogs CONT mode: Repeating movement between dogs/PROG mode: 5 points position movement | ||
| Communication | USB | USB (for PCs) | |
| Input | Overload input | Stops by FGPX(FGP) overload signal | |
| Measurement table | 150x200mm | ||
| Operating temperature range | 0 to 45°C (No condensation) | ||
| Power | AC100V±10% | ||
| Weight | Approx. 63kg | Approx. 65kg | |
| Accessories | Power cable, FGPX(FGP) connection cable, USB cable | ||
| PC Software | Specialized communication software (USB compatible) Free downloads from website Transmits load and distance data and indicates the graph/With trigger function (Starts data import when the specified load is attained) Can set the frequency of continuous data import/With upper and lower limits judgement function | ||
| Others | Power AC socket for force gauges, emergency stop switch | ||
| Supported force gauges | FGP-0.2 to 50,100 / FGPX-0.2 to 50, 100 |
FGP-0.2 to 50,100 / FGPX-.02 to 50,100 / FGPX-250H |
|
| Model | FGS-100HB | FGS-250HB |
| Measurement load | 1000N (100kg) | 2500N (250kg) |
| Endurance load | 1000N (100kg) | 2500N (250kg) |
| Stroke | 400mm | |
| 1 handle rotation | Approx 1.33mm | Approx. 0.55mm |
| Measurement table | 150x200mm | |
| Weight | Approx. 56kg | |
| Supported force gauges | FGP-0.2 to 50 / FGP-0.2 to 50, 100 / FGPX-0.2 to 50, 100 | FGN-0.2 to 50 / FGP-0.2 to 50, 100 / FGPX-0.2 to 50, 100 / FGPX-250HB |
Inquiry - Shimpo Motorized Force Gauge Stands (Vertical Type) (FGS-100VC Series)
.png)
