Accretech Surface Texture Measuring Instruments (Surfcom Touch 35/40/45 Series)

Share:


Accretech Surface Texture Measuring Instruments (Surfcom Touch 35/40/45 Series)

Features

Selectable From 3  Types According To Application

 

35 (Standard type)
The standard-type with different attitudes to measure horizontal, inclined, vertical and ceiling surfaces.
40 (Retraction type)
Retract-type that reduces damage to the stylus and pickup by raising the pickup while waiting for measurement or at ending. It can be used as a detector incorporated into an automatic machine.
45 (Horizontal tracing type)
The transverse trace-type where the pickup moves sideways. Narrow areas, such as crankshaft pins and journals, that were difficult to measure before can now be measured.

 


A Calibration table provided as a standard accessory makes calibration work easy

A roughness specimen for surface texture and a driver selected above are set to the standard calibration table.

Calibration can be conducted easily without need of height and inclination adjustment of the driver as before.

 


 

Optional pickups allow for various types of measurement

The pickups, that comes in contact with the workpiece is replaceable. Various types of workpieces can be measured by using optional pickups such as those for small or extemely small holes, deep groves, etc..

 


 

Easy-to-Use Screen

An amplifier with a 7-inch wide touch panel and easy-to-use new interface provides higher operability.

Easy-to-use operation eliminates the need of instructions.

 


 

Multi-language support available worldwide

20 Asian and European languages including Japanese, English and German are provided as standard. Language can be easily changed with one touch.

 


 

USB/micro USB ports as standard equipment

15 measurement conditions and 20 measurement results can be stored in the SURFCOM TOUCH amplifier.
More conditions and results can be stored by connecting a USB memory to the standard USB port.

The amplifier is also equipped with a micro USB port.
Measurement data can be transferred to the computer when connected with a USB cable, and a simple inspection report can be created using attached SupportWare II.

 


 

Measurement results can be printed quickly

The dedicated printer allows for quick printing of measurement results.

Of course, any measurement data saved in the amplifier or USB memory can be output.

 


 

Specifications

Model SURFCOM TOUCH
 35 40 45
Type Tip Radius 5µm Tip Radius 2µm Tip Radius 5µm Tip Radius 2µm Tip Radius 5µm
Measuring Range Z Direction -210 ~ +160
Drive Axis X-direction 16 Y-direction 16
Tracing Driver Movement Type Standard Type Retraction Type Horizontal Tracing Type
Evaluation Length (mm) 0.2 to 16.0 0.2 to 4.0
Measurement Speed (mm/s) 0.5, 0.6, 0.75, 1.0 0.6
Pick-Up Sensing Type Differential Inductance
Measurement Method Skid
Z Direction Resolution 0.0007μm/-210 to 160μm
Model E-DT-SM10A E-DT-SM49A E-DT-SM10A E-DT-SM49A E-DT-SM39A
Stylus Measurement Force 4mN 0.75mN 4mN 0.75mN 4mN
Tip Radius rtip = 5µm rtip = 2µm rtip = 5µm rtip = 2µm rtip = 5µm
Tip Angle 90° cone 60° cone 90° cone 60° cone 90° cone
Tip Material Diamond
Analysis Item Calculation Standard Comply with JIS2013/2001, JIS1994, JIS1982, ISO1997/2009, ISO13565, DIN1990, ASME2002/2009, ASME1995, CNOMO
Parameter Profile Curve Pa, Pq, Pp, Pv, Pc, PSm, PΔq, PPc, Psk, Pku, Pt, Pmr(c), Pmr, Pδc, Rz82, TILTA, AVH, Hmax, Hmin, AREA, Rmax, Rz, Sm, Δa, Δq, λa, λq, Lr, Rsk, Rku, Rk, Rpk, Rvk, Mr1, Mr2, Vo, K, tp, tp2, Hp
Roughness Curve Ra, Rq, Rz, Rv, Rc, Rt, RSm, RΔq, Rsk, Rku, Rmr(c), Rmr, Rδc, Rz94, R3z, RΔa, Rλa, Rλq, Ry, Lr, Sm, S, tp, tp2, PC, RPc JIS, RPc ISO, RPc EN, Pc, PPI, Rp, Rmax, Rz.l, RS, Rmr2, Mr1, Mr2, Rpk, Rvk, Rk, Vo, K, A1, A2. Rpm, Δa, Δq, Htp
Motif R, Rx, AR, W, Wx, AW, Rke, Rpke, NCRX, NR, CPM, SR, SAR, Wte, NW, SAW, SW, Mr1e, Mr2e, Vo, K
Evaluation Curve Profile Curve, Roughness Curve, ISO13565 Special Roughness Curve, Roughness Motif Curve, Waviness Motif Curve, Upper Envelope Waviness Curve
Characteristics Graph Abbot Curve, Amplitude Density Function, Power Graph
Filter Filter Type Gaussian, 2RC (phase compensation), 2RC (non-phase compensation)
Cutoff Value λc (mm) 0.08, 0.25, 0.8, 2.5
λs (µm) None, 2.5, 8, 25
Amplification Indicator Display 7-inch color liquid crystal touch panel
Data Output USB connectors for USB memory x2 (model without printer) x1 (model with printer), Micro USB connector for USB communication x1
Print Output Standard function for models with printer and optional for models without printer (external printer unit) / Thermal recording paper width: 58mm (recording width: 48mm)
Language Japanese, English, Chinese (Traditional Chinese, Simplified Chinese), Korean, Thai, Malay, Vietnamese, Indonesian, German, French, Italian, Czech, Polish, Hungarian, Turkish, Swedish, Dutch, Spanish, Portuguese
Specifications Power Supply Charging Built-in battery (to be charged using AC adaptor), charging period: 3 hours (about 600 measurements can be take when fully charged)
Power Supply AC100 to 240V ±10%, 50/60 Hz, Single phase
Power Consumption Maximum 80VA
External Dimension (W x D x H)/Weight Printer-Equipped Model Amplification Indicator: 320 x 167 x 44 mm/about 2kg for he entire system
Models w/o Printer Amplification Indicator: 252 x 167 x 44 mm/about 1.6kg for he entire system
Standard Accessories Roughness Specimen (E-MC-S24C), Calibration Table (E-WJ-S1045A), touch pen (E-MA-S112A), printing paper (E-CH-S25A)*, Instruction manuals, SupportWare II nosepiece (V-type) (E-WJ-S536A)**

Accretech (Japan) Introduction of SupportWare II: Transfer Data and Create Simple Inspection Report


 Inquiry - Accretech Surface Texture Measuring Instruments (Surfcom Touch 35/40/45 Series)

GET IN TOUCH
10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772
STAY CONNECTED
LIKE & FOLLOW US