Matsuzawa Rockwell Hardness Tester (RMT Series)

Share:


Matsuzawa Rockwell Hardness Tester (RMT Series)

Plastic measuring system, easy setting, traditinal dial change-over system Rockwell Hardness Tester for Rockwell Hardness Testing by MSP Metrology (M) Sdn Bhd from Matsuzawa Japan

 

Features

DIGITAL ROCKWELL RMT SERIES

Digital rockwell hardness tester RMT series

A pioneer of digital Rockwell hardness tester

Rockwell hardness tester of Matsuzawa continues pursuing usability anyone can easily operate Rockwell hardness tester of Matsuzawa

 


 

COLOR LCD TOUCH PANEL

Loaded with a Color LCD display with backlight. The hardness tester secure very clear and high visibility.

 


 

DISPLAY DEPTH

You can easily confirm depth on a measuring mode display.

 


 

Special Features

AUTO START
– After setting the reference load, the test load is applied automatically.
– The manual start is also possible

EASY SETTING
– Reference load can be easily set with a bar graph display on the bright screen and electronic sound.
– More over, an error-preventing device is also mounted.

PLASTIC MEASURING SYSTEM
– Specific measuring method for plastic in compliance with ASTM and JIS activated by one-touch easy operation.
– Time for reading the value the after unloading the test load can be set freely.

VARIOUS DATA PROCESSING FUNCTION
– It makes acceptance and rejection judgement, conversion to other tabulation and computing for data memory(999 data), maximum value, variation, average, standard deviation etc.

APPLICABLE TO CE & SAFETY
– Safety design applicable to EU low voltage command,EMC command and machine command. In addition to high-rigidity body.
– Overturn-preventive metal fittings are attached as standard to prevent overturing by earthquakes etc.

 TRADITIONAL DIAL CHANGE-OVER SYSTEM
– Dial changeover systems make change the test load easily by turning the dial. Accordingly the design is dust-proof including the weights for test load.

 


 

Specifications

ITEM RMT-3 RMT-1
Preliminary Test Force 29.42    98.07    N 98.07     N
      3         10       kgf      10        kgf
Test Force RMT-1 588.4      980.7      1471      N
     60          100        150       kgf
RMT-3      147.1    294.2    441.3    588.4    980.7    1471    N
          15         30        45         60       100        150    kgf
Preliminary Test Force Setting LCD Graph and Electronic Signal Monitoring fine adjustment is unnecessary.
Test Force Control Automatic (Loading → Holding → Release)
Start Operation Automatic Start/Manual Start Selection
Test Force Dwell Time 3 ~ 99 sec
Plastic Test Function Standard function, time up to hardness value display after release: 3 ~ 99 sec
Test Scale 15N   30N   45N   15T   30T   45T   15W   30W   45W   15X   30X   45X   15Y   30Y   45Y C  D  A  G  B  F  K  E  H  P  M  L  V  S  R
C  D  A  G  B  F  K  E  H  P  M  L  V  S  R
Data Output Centronics (Standard)
RS232C or Serial Output selectable (Factory setting RS232C)
Data Memory Max. 999 Test Data
Hardness Conversion Based on SAE J417B, ASTM E140
OK/NG Criteria Upper and Lower Limit setting and HI/OK/LOW display
Statistical Calculation Batch conversion of memorized data. (Max. value, Min. value, dispersion (R), mean value)
Converted Value, same too
RS232C Communication Line Baud Rate: 1200/2400/4800/9600 bps selectable
Error detection: Parity even/Parity none selectable
Accuracy Conform to JIS B7726 and ASTM E-18
Max. Specimen Height 200mm
Max. Specimen Depth 165mm
Dimension W220 x D540 x H830mm
Weight 100kg
Power Supply Single Phase AC100 ~ 240V 50/60Hz available for export models

 


 

Accessories

 



 Inquiry - Matsuzawa Rockwell Hardness Tester (RMT Series)

GET IN TOUCH
10, Jalan Gemilang 9, Taman Perindustrian Cemerlang, 81800 Ulu Tiram, Johor, Malaysia.
+607-862 6772
STAY CONNECTED
LIKE & FOLLOW US